| CD Cotent | Errors and Corrections | Notes | Revision |
|---|---|---|---|
| The index pages of Technical Reference Guide | The page numbers shown in the index pages were incurrent as the information was for the previous version of the reference. | 12.01.26 | . |
| Helix hands of SBS products | The helix angles for the following products were incorrect. Product: SBS1.5-6015R, 1560L, SBS2-6015R and 1560L Also, the data for the allowable torque was revised in accordance with the corrected helix angles. For gears with 39°helix-hand, it does not allow you to calculate the gear strength on our Web Catalog. Please use the GCSW, the gear calculation software available for the calculation. | 12.01.19 | . |
| Diagram for B1-Shaped LM Miter Gears | The tooth width shown in the diagram was incorrect and was revised as follows.There is no correction in the data for tooth width and the allowable torque shown in the dimension table. corrected to --> 
| 11.12.14 | . |
| SB6-4515のDXF | The DXF File for SB6-4515 was not provided properly, the file was for CB6-4515 which is no longer manufactured. The latest DXF files are available for download on our Web Catalog. | 11.12.05 | . |
| DM, DB products | Correction in Bore | 11.11.9 | . |
| SSG 0.5 and 0.8 products | Correction in Tooth hardness | 11.10.19 | . |
| Dimension table for BG Bronz Worm Wheels | The items(fields) below are corrected The field of "Web O.D." and "Mounting distance" are combined and changed to the field "Set Screw" (H) changed to J (I）changed to size J changed to L | 11.10.11 | . |
| SB2-6012 | Correction in Length of bore / shaft | 11.10.07 | . |
| MSGA1.5-15 | Correction in Outside diameter | 11.10.04 | . |
| DSL Acetal Fairloc Hub Spur Gears | A caution note was missing.
The line below was added. "Holding strength between the teeth (acetal) and the core (SUS303) is 2.9N・ｍ for all DSL products. Please consider the holding strength when selecting products." | 11.09.30 | . |
| SMS1.5-25L/R Products Outside diameter and Crown to back length | Outside diameter : Crown to back length : | 11.09.30 | . |
| Shape diagram for SRS Products | Although there is a groove (approx.1mm) at the foot, it does not cause problems functionality-wise. --> 
| 11.06.30 | . |
| Web thickness for CG5-60R1 | Web thickness | 11.05.24 | . |
| For SUSCP products, the values of Distance Traveled in One Turn are corrected. | SUSCP5-20 SUSCP5-25 SUSCP5-30 SUSCP10-20 SUSCP10-25 SUSCP10-30 | 11.05.16 | . |
| GC Products The caution notes No.1 and No.3 described at "Caution on Product Characteristics" | (1) (Changed as below) S-type products are of minimum bore products. For products with a snap ring and a tapped hole, a set screw is included as an accessory. (3)Since Uni-chromate treatment is applied, there may be some changes in dimensions of bore, keyway etc., decreasing by a few μｍ.. | 11.04.15 | . |
| KHG products The caution note No.3 described at “Caution on Secondary Operations “ | While cutting off the entire hub may cause curvature deformation by residual stress, some products are | 11.04.07 | . |
| Heat treatment for SR, SRF, SRFD, SRFK, SRO, SROS, SRH, SRHF, SRHDF, STRCPF, STRCPFD, SRCP, SRCPF, SRCPFD products. | 11.04.07 | . | |
Allowable torque (bending strength) of NSU Products. | The set value for allowable bending stress was incorrect. | 11.04.07 | . |
Duplex Worm Wheels | The image for caution on assembling is missing. See here to find the image of the rotational direction. | 11.03.09 | . |
Fastening torque of SUKB Products | With consideration for the maximum allowable stress of MC Nylon, the material used for PSA Plastic Spur Gears, the values of recommended fastening torque and friction coupling torque are revised. | 11.03.09 | . |
