KHK Stock Gears 3013
236/452

234SpurGearsHelicalGearsInternalGearsRacksCP Racks& PinionsMiterGearsBevelGearsScrewGearsWormGear PairBevelGearboxesOtherProducts  Thermal Rened Ground RacksCircular Pitch 5、10KRGCP・KRGCPF・KRGCPDSpecificationsPrecision gradeKHK R 001 grade 1Gear teethStandard full depthPressure angle20°MaterialSCM440Heat treatment Thermal refining onlyTooth hardness225~285HBCatalog No.Pitch mm(Module)No. of teethShapeTotal lengthFace widthHeightHeight to pitch lineMounting hole dimensionsNo. ofmounting holesMountingscrew sizeABCDEFGKRGCPD5-500KRGCPD10-500CP5(1.5915)CP10(3.1831)10050RDRD5005001530203518.4131.82814404014014044M5M10SWGGGGGSWABCDR1CPCatalog No.Pitch mm(Module)No. of teethShapeTotal lengthFace widthHeightHeight to pitch lineAllowable force (N)Allowable force (kgf)Weight(kg)ABCDBending strengthSurface durabilityBending strengthSurface durabilityKRGCPF5-1000KRGCPF10-1000CP5(1.5915)CP10(3.1831)200100RFRF100010001530203518.4131.823660146001560623037314901596352.177.49Catalog No.Pitch mm(Module)Effectiveno. of teethShapeTotal lengthFace widthHeightHeight to pitch lineAllowable force (N)Allowable force (kgf)Weight(kg)ABCDBending strengthSurface durabilityBending strengthSurface durabilityKRGCP5-100KRGCP5-500CP5(1.5915)1899R198505152018.41366015603731590.211.09KRGCP10-100KRGCP10-500CP10(3.1831)849R198505303531.8214600623014906350.733.78*SW Saw Blade FinishedCatalog No.Pitch mm(Module)Effectiveno. of teethShapeTotal lengthFace widthHeightHeight to pitch lineAllowable force (N)Allowable force (kgf)Weight(kg)ABCDBending strengthSurface durabilityBending strengthSurface durabilityKRGCPF5-500HKRGCPF5-1000HCP5(1.5915)100200RF5001000152018.41366022703732321.082.17KRGCPF10-500HKRGCPF10-1000HCP10(3.1831)501005001000303531.8214600915014909333.757.49Circular Pitch 5、10SpecificationsPrecision gradeKHK R 001 grade 1*Gear teethStandard full depthPressure angle20°MaterialSCM440Heat treatment Thermal refined, teeth induction hardenedTooth hardness50~60HRCBCDACPCPGGGGGRFCatalog No.●: J Series (Available-on-request)Pitch mm(Module)No. of teethShapeTotal lengthFace widthHeightHeight to pitch lineMounting hole dimensionsNo. ofmounting holesMountingscrew sizeABCDEFG•KRGCPFD5-500HJ•KRGCPFD5-1000HJCP5(1.5915)100200RD5001000152018.418255015018046M5•KRGCPFD10-500HJ•KRGCPFD10-1000HJCP10(3.1831)501005001000303531.8214255015018046M10KRGCPF - H・KRGCPFD-H  Hardened Ground RacksCP* The precision grade of J Series products is equivalent to the value shown in the table.Standard tooth surface induction hardening is applied resulting in reasonably priced racks which have their surface durability increased by 50% over KRGCPF !*From improvements in our manufacturing processes, overall pricing is reduced by 20%! C-chamfering is widened for convenience in installation.*

元のページ 

10秒後に元のページに移動します

※このページを正しく表示するにはFlashPlayer10.2以上が必要です